TSA-200 / TSA-200XT / TSA-240 / TSA-240XT
© 2010 – 2014 Telefire Fire & Gas Detectors Ltd Revision 1.06 July 2014
Page 66 of 79
19 Maintenance
No specific maintenance is required for the TSA-200 product family.
Keep the TSA-200 product family clean and dry. If necessary, clean the outside of the
enclosure with a slightly damp cloth.
The batteries should be tested and replaced according to the instructions of the battery's
manufacturer.
If the batteries show any signs of swelling, leakage or corrosion, or the ECD indicates a
battery fault, replace with a new set.
Maintenance routine:
Tighten the TBs
Verify ECD is in the quiescent condition
To Next Page
Loading...
