FN990
Family Hardware Design Guide
1VV0301752 Rev. 3 Page 77 of 92 2022-10-07
Not Sub
ect to NDA
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Labelling requirements for the host device
The host device shall be properly labelled to identify the modules within the host device.
The certification label of the module shall be clearly visible at all times when installed in
the host device, otherwise the host device must be labelled to display the FCC ID of the
module, preceded by the words "Contains transmitter module", or the word "Contains",
or similar wording expressing the same meaning, as in the below table.
Model Host device FCC label
FN990A28 Contains FCC ID: RI7FN990A28
FN990A40 Contains FCC ID: RI7FN990A40
Table 53: Host device FCC Label
11.2.2. Canada ISED
11.2.2.1. ISED Database
The products ISED certified can be found here:
Les produits certifiés ISED peuvent être trouvés ici :
https://sms-sgs.ic.gc.ca/equipmentSearch/searchRadioEquipments?execution=e1s1&lang=en
11.2.2.2. Applicable ISED Rules /
Liste des Règles ISDE Applicables
Model Applicable ISED rules /
Règles ISDE applicables
FN990A28 RSS: 130 Issue 2, 132 Issue 3, 133 Issue 6, 139 Issue 3, 140 Issue 1,
192 Issue 4, 195 Issue 2, 199 Issue 3;
RSS-102 Issue 5, RSS-Gen Issue 5
FN990A40
Table 47: Applicable ISED rules / Règles ISDE applicables
11.2.2.3. ISED Regulatory Notices /
Avis réglementaires d'ISDE
Modification Statement /
Déclaration de modification
Telit has not approved any changes or modifications to this device by the user. Any
changes or modifications could void the user’s authority to operate the equipment.
Telit n’approuve aucune modification apportée à l’appareil par l’utilisateur, quelle qu’en
soit la nature. Tout changement ou modification peuvent annuler le droit d’utilisation de
l’appareil par l’utilisateur.
To Next Page
Loading...
Need help?
General