FN990
Family Hardware Design Guide
1VV0301752 Rev. 3 Page 8 of 92 2022-10-07
Not Sub
ect to NDA
1. INTRODUCTION
Scope
This document introduces the Telit FN990 Family module and presents possible and
recommended hardware solutions for the development of a product based on this
module. All the features and solutions described in this document are applicable to all
FN990 Family variants listed in the applicability table.
This document cannot include every hardware solution or every product that can be
designed. Where the suggested hardware configurations are not to be considered
mandatory, the information provided should be used as a guide and starting point for the
proper development of the product with the Telit FN990 Family module.
Audience
This document is intended for Telit customers, especially system integrators, about to
implement their applications using the Telit FN990 Family module.
Contact Information, Support
For general contact, technical support services, technical questions and report of
documentation errors contact Telit Technical Support at:
TS-EMEA@telit.com
TS-AMERICAS@telit.com
TS-APAC@telit.com
TS-SRD@telit.com
TS-ONEEDGE@telit.com
Alternatively, use:
https://www.telit.com/support
For detailed information about where you can buy the Telit modules or for
recommendations on accessories and components visit:
https://www.telit.com
Our aim is to make this guide as helpful as possible. Keep us informed of your comments
and suggestions for improvements.
Telit appreciates the user feedback on our information.
To Next Page
Loading...
Need help?
General