28
Step 3 Set IP Address, Subnet Mask, Default Gateway, and Primary DNS Server. If another DNS server is
available, set Secondary DNS Server to the IP address of the additional DNS server.
Step 4 Click Save.
Step 5 Click OK.
---End
The following page is displayed. To continue to configure the AP, please do as follows:
− If the new and original IP addresses belong to the same network segment, click Back to log in to
the web UI of AP again.
− Otherwise, assign your computer an IP address that belongs to the same network segment as the
new IP address of the AP before login.
To Next Page
Loading...
