Document version: V1.0
29
Example of setting up a wireless network encrypted with PSK
Networking requirement
A hotel wireless network with a certain level of security must be set up through a simply procedure.
In this case, WPA-PSK, WPA2-PSK or Mixed WPA/WPA2-PSK security mode is recommended.
Assume that the SSID is hotel, the Wifi password is UmXmL9UK. See the following figure.
Configuration procedure
Assume that the first SSID of the 2.4 GHz radio band of the AP is to be configured. WPA2-PSK and
AES are used here for illustration.
Step 1 Choose Wireless > SSID.
Step 2 Select the first SSID from the SSID drop-down list menu.
Step 3 Set Status to Enable.
Step 4 Change the value of the SSID text box to hotel.
Step 5 Set Security Mode to WPA2-PSK and Encryption Algorithm to AES.
Step 6 Set Key to UmXmL9UK.
Step 7 Click Save.
To Next Page
Loading...
