Tenda i27 - Client list

Document version: V1.0
16
4.4 Client list
The Client List page allows you to view wireless clients connected to each SSID of the AP and their
basic information.
To access the page, choose Status > Client List.
Parameter description
Parameter
Description
SSID
Select the SSID from the drop-down list menu to view client information connected
to it.
MAC Address
It specifies the physical address of the wireless client.
IP Address
It specifies the IP address of the wireless client.
Client Type
It specifies the operating system of the client.
The AP identities the client type only when both the two conditions are met:
⚫
The Identify Client Type function is enabled (To enable it, navigate to
Wireless > Advanced Settings).
⚫
The client connected to the AP has accessed an http:// URL.
Otherwise, -- is displayed.
Connection Duration
It specifies the duration of a connection between a wireless client and a wireless
network with a specified SSID.
Transmit Rate
It specifies the real time traffic the client has transmitted.