Document version: V1.0
92
Appendix
A.1 Default parameter values
The following table lists the default parameter values of the AP.
Static IP
If there is a DHCP server in the LAN, the AP’s LAN IP
address type will be changed to DHCP automatically.
In this case, you need to check the new IP address of
the AP on the client list of the DHCP server.
The AP allows 8 SSIDs.
SSID is Tenda_XXXXXX. XXXXXX indicates the last 6
digits of the AP’s LAN MAC address with a range of
XXXXXX~XXXXXX+7.
By default, the primary SSID is enabled, and the other
SSIDs are disabled.
The AP allows 8 SSIDs.
SSID is Tenda_XXXXXX_5G. XXXXXX indicates the last
6 digits of the AP’s LAN MAC address with a range of
XXXXXX+8~XXXXXX+15.
By default, the primary SSID is enabled, and the other
SSIDs are disabled.