Tenda i27 - Advanced; Overview

Document version: V1.0
72
7 Advanced
7.1 Overview
The Traffic Control page allows you to set limits on the internet speed of clients to guarantee a
proper allocation of limited broadband resources.
By default, the Traffic Control function is disabled. If you want to use this function, configure it on
the Advanced > Traffic Control page.
Parameter description
Parameter
Description
Traffic Control
⚫
Disable: The Traffic Control function is disabled.
⚫
Manual: The Traffic Control function is enabled. The network
administrator manually sets SSID and the maximum upload/download
rate of user devices to limit the total bandwidth of SSID and evenly
allocate bandwidth to users. In this way, if multiple SSIDs are enabled,
and a user network with a lower priority (such as guest network)
occupies an excessively high internet speed or a user occupies too much
bandwidth, such circumstances as excessively low internet speed or even
internet unavailability for other users will not occur.
Radio Band
It specifies the radio band of the WiFi network on which you want to set a
traffic control rule.
SSID
It specifies the name of the WiFi network on which you want to set a traffic
control rule.