Tenda i27 - Page 78

Document version: V1.0
71
II. Configure the switch
Create IEEE 802.1q VLANs described in the following table on the switch.
Port Connected To
Accessible VLAN ID
Port Type
PVID
AP
1,2,3
Trunk
1
Router
2
Access
2
Internal Server
3
Access
3
Retain the default settings of other ports. For details, refer to the user guide for the switch.
---End
Verification
Wireless clients connected to the internet wireless network can only access the internet, and
wireless clients connected to the oa wireless network can only access the internal server.