Tenda i27 - RF Optimization

Document version: V1.0
51
6.3 RF optimization
The RF Optimization page allows you to modify the radio parameters to optimize performance.
To access the page, choose Wireless > RF Optimization.
You are recommended to retain the default settings if without the professional guidance to prevent
degrading wireless performance of the AP.
Parameter description
Parameter
Description
Beacon Interval
Used to set the interval at which this device sends Beacon frames.
Beacon frames are sent at the interval to announce the existence of a wireless
network. Generally, a smaller interval allows wireless clients to connect to this device
sooner, while a larger interval allows the wireless network to transmit data quicker.