Tenda i27 - Status; System status

Document version: V1.0
12
4 Status
4.1 System status
The System Status page allows you to check the System Status and LAN Port Status of the AP.
To access the page, choose Status > System Status.
Parameter description
Parameter
Description
System Status
Device Name
It specifies the name of the AP.
You can modify it on LAN Setup page.
Uptime
It specifies the time that has elapsed since the AP starts up last time.
System Time
It specifies the current system time of the AP.
Firmware Version
It specifies the current firmware version number of the AP.
Hardware Version
It specifies the current hardware version number of the AP.
Number of
It specifies the quantity of wireless devices currently connected to the