EasyManuals Logo

Tenda i27 User Manual

Tenda i27
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #85 background imageLoading...
Page #85 background image
Document version: V1.0
78
8.2 Maintenance
The Maintenance page allows you to reboot and reset AP, upgrade firmware, back up or restore
settings, and control LED indicator.
8.2.1 Reboot
Rebooting the AP disconnects all connections. You are recommended to reboot the AP in spare time.
Manual reboot
If a parameter does not take effect or the AP does not work properly, you can try rebooting the AP
manually to resolve the problem.
Method: on the Tools > Maintenance > Maintenance page, click Reboot.
Reboot schedule
This function allows the AP to automatically reboot as scheduled. You can use this function to
prevent wireless performance degradation or network instability that occurs after a long AP uptime.
The AP supports the following two types of scheduled reboot:
Reboot Interval: The AP reboots at the interval you set.
Reboot Schedule: The AP reboots regularly at the time you set.
Configuring the AP to reboot at an interval
Rebooting at intervals is based on the system time. To avoid reboot time error, ensure that the system
time is correct.
Step 1 Click Tools > Maintenance > Reboot Schedule.
Step 2 Enable Reboot Schedule.
Step 3 Set Type to Reboot Interval.

Other manuals for Tenda i27

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda i27 and is the answer not in the manual?

Tenda i27 Specifications

General IconGeneral
Antenna typeExternal
Antennas quantity2
Antenna gain level (max)4 dBi
2.4 GHzYes
MIMO typeMulti User MIMO
Number of users254 user(s)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11k, IEEE 802.11n, IEEE 802.11v, IEEE 802.3at
Virtual LAN featuresTagged VLAN
Spread spectrum methodOFDMA
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate2976 Mbit/s
Maximum data transfer rate (5 GHz)2402 Mbit/s
Maximum data transfer rate (2.4 GHz)574 Mbit/s
Power consumption (max)14.04 W
PlacementCeiling, Wall
Product colorWhite
Security algorithmsSSID, WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Number of SSID supported8
Service Set Identifier (SSID) featuresHidden SSID
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)-10 - 45 °C
Operating relative humidity (H-H)10 - 90 %
USB 2.0 ports quantity-
Ethernet LAN (RJ-45) ports1
Weight and Dimensions IconWeight and Dimensions
Depth38 mm
Width178 mm

Related product manuals