Tenda i27 - Example of Configuring QVLAN

Document version: V1.0
69
6.8.3 Example of configuring QVLAN
Networking requirement
A hotel has the following wireless network coverage requirements:
−
Guests are connected to VLAN 2 and can only access the internet.
−
Staff are connected to VLAN 3 and can only access the internal server.
Solution
−
Set the SSID to internet for guests, oa for staff on the 2.4 GHz network.
−
Configure VLANs for the above SSIDs on the AP.
−
Configure VLAN forwarding rules on the switch.
The internal server must be deployed with a DHCP server in the LAN to assign IP addresses to downlink
devices.
Internet
Router
PoE switch
AP
SSID for Guests: internet VLAN 2
SSID for Staff: oa VLAN 3
Internal server
(with a DHCP sever)
WAN
LAN