EasyManuals Logo

Tenda i27 User Manual

Tenda i27
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
Document version: V1.0
39
10. Select Wireless Other, click Add, and click OK.
11. Click Edit Dial-in Profile, click the Authentication tab, configure settings as shown in the
following figure, and click OK.
12. When a message appears, click No.
Step 3 Configure user information.
Create a user and add the user to group 802.1x.

Other manuals for Tenda i27

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda i27 and is the answer not in the manual?

Tenda i27 Specifications

General IconGeneral
Antenna typeExternal
Antennas quantity2
Antenna gain level (max)4 dBi
2.4 GHzYes
MIMO typeMulti User MIMO
Number of users254 user(s)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11k, IEEE 802.11n, IEEE 802.11v, IEEE 802.3at
Virtual LAN featuresTagged VLAN
Spread spectrum methodOFDMA
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate2976 Mbit/s
Maximum data transfer rate (5 GHz)2402 Mbit/s
Maximum data transfer rate (2.4 GHz)574 Mbit/s
Power consumption (max)14.04 W
PlacementCeiling, Wall
Product colorWhite
Security algorithmsSSID, WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Number of SSID supported8
Service Set Identifier (SSID) featuresHidden SSID
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)-10 - 45 °C
Operating relative humidity (H-H)10 - 90 %
USB 2.0 ports quantity-
Ethernet LAN (RJ-45) ports1
Weight and Dimensions IconWeight and Dimensions
Depth38 mm
Width178 mm

Related product manuals