Tenda i27 User Manual

Document version: V1.0
67
Parameter description
Parameter
Description
QVLAN
It specifies whether to enable the QVLAN function of the AP.
PVID
It specifies the ID of the default native VLAN of the trunk port of the AP.
Management VLAN
It specifies the ID of the AP management VLAN.
After changing the management VLAN, you can manage the AP only after connecting
your computer or AP controller to the new management VLAN.
2.4 GHz SSID
It specifies the currently enabled SSID(s) over the 2.4 GHz/5 GHz band of the AP, and
the VLAN IDs corresponding to SSIDs.
After the QVLAN function is enabled, the wireless ports corresponding to SSIDs
functions as access ports. The PVID of an access port is the same as its VLAN ID.
5 GHz SSID
VLAN ID

Tenda i27 Specifications

General

Antenna type	External
Antennas quantity	2
Antenna gain level (max)	4 dBi
2.4 GHz	Yes
MIMO type	Multi User MIMO
Number of users	254 user(s)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11k, IEEE 802.11n, IEEE 802.11v, IEEE 802.3at
Virtual LAN features	Tagged VLAN
Spread spectrum method	OFDMA
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	2976 Mbit/s
Maximum data transfer rate (5 GHz)	2402 Mbit/s
Maximum data transfer rate (2.4 GHz)	574 Mbit/s
Power consumption (max)	14.04 W
Placement	Ceiling, Wall
Product color	White
Security algorithms	SSID, WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Number of SSID supported	8
Service Set Identifier (SSID) features	Hidden SSID
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-10 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
USB 2.0 ports quantity	-
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	38 mm
Width	178 mm