PW201A Wireless N Powerline AP User Guide
on the PW201A starts blinking, which indicates the PW201A is ready for
pair auto-negotiation..
3. Observe the two PLC device’s LED status. When the Power LED
displays a solid light and the PLC LED blinks rapidly, it indicates an
encrypted private Powerline network is successfully created.
How to add more Powerline devices to the existing private network
Now that the PW201A (say PW201A-1) and P200 has created a network,
say Network1, and you’re trying to add a second PW201A (say PW201A-2)
to this network, do as follows:
68
To Next Page
Loading...
