PW201A Wireless N Powerline AP User Guide
72
6. Q: I have installed two PW201A devices under a single electric meter.
How am I supposed to manage them?
A: By default, the two PW201A devices cannot be managed
concurrently as both share the same IP address of "192.168.0.254".
However, below steps may help: a) Disconnect either PW201A from the
power supply first;
b). Access the connected PW201A's web utility to change its IP address to
a different one such as "192.168.0.253";
c). Connect the disconnected PW201A back to the power supply. Now, you
can manage both PW201A devices concurrently.
7. Q: How many Powerline devices at most can be included under a
single electricity meter (on a single Powerline network)?
A: A single Powerline network may include up to 9 Powerline devices,
be it Powerline adapter, Powerline AP or Powerline router. However you
can create multiple private networks.
8. Q: What is the maximum transfer distance of a Powerline device?
A: Up to 300m can be reached with least interference. However
transmission rate decreases gradually beyond 100m.
To Next Page
Loading...
