Chapter 2 – Using the F4T Front Panel
Page 24 TestEquity F4T Controller
Personalizing the Home Screen
Placement of objects on the home screen can be modified by the user. You must have a password
to enter the Personalization screen.
Note: Your controller might not have all the choices available depending on its configuration.
To personalize the Home screen, do the following:
1. From any screen, press the Menu button.
2. Press Personalize.
3. Press Basic Personalization.
4. Select the desired Home Layout by pressing
Main Top, Main Center, or Main Bottom.
The red arrows were placed on this graphic for
emphasis only and represent what the focus of this
operation is; that being, defining the location of the profile status and the output widget bars. As
shown above, the options include placing them on the bottom, split screen top and bottom or on
the top.
1. Tap each page (through 4) in which loop
information will be displayed. In the graphic
shown, each page has been configured to display
from 1 to 4 loops on each page.
2. Define the content blocks (number of loops) that
will be displayed on each page.
Defining page 1 to display two loops (content blocks):
• From any screen, press the Menu button.
• Press Personalize.
• Press Basic Personalization.
• Select the desired Home Layout by pressing
Main Top, Main Center, or Main Bottom.
• Press Page 1.
• Select “2 Content Blocks”.
To Next Page
Loading...