To Next PageTo Next Page
Need help?Do you have a question about the TestEquity F4T and is the answer not in the manual?
General| Brand | TestEquity |
|---|---|
| Model | F4T |
| Category | Controller |
| Language | English |
Lists critical CAUTION statements regarding F4T Manuals, alarm functions, configuration, and settings.
Guides on understanding the controller's user interface elements and flow.
Describes the controller's home screen displayed after initialization, showing chamber status and profile information.
Details parameters, navigational buttons, and the main menu accessible from the F4T controller's home screen.
Guides on setting static (manual) set points and navigating the closed-loop set point screen.
Details how to access and configure ramp settings for gradual set point changes without a profile.
Outlines profile mode and available actions for managing profiles (run, pause, terminate, edit).
Details three methods to initiate data logging: front panel, profile settings, and Modbus communications protocol.
Explains the security features, user groups, and password management for accessing controller functions.
Describes how to enable security and set access levels for different features and user groups within Composer.
Guides users on saving the controller's current configuration as a system image file to a storage device.
Explains how to restore a previously saved system image to the F4T controller.
Introduces Composer's profile management, covering view, parameters, steps, creation, saving, loading, duplicating, and deleting.
Lists required equipment and critical safety precautions for calibrating the F4T controller.
Details the procedures for setting up and performing calibration for Air and Humidity sensors.
