TestEquity F4T User Manual

Chapter 3 – Composer Software
Page 30 TestEquity F4T Controller
• Profiles, controls access to creating and editing ramp and soak profiles.
• Global Settings, controls access to the system’s global settings, temperature units, AC line
frequency and real time clock setting.
• Network, controls access to Ethernet settings.
• Operations, controls access to operational parameter settings.*
• Personalize, controls access to customizing the controller’s home screen.*
• Data Logging Setup, controls access to settings for Data Logging.
• File Transfer, controls access to transfer of setup, profile, and log files.
• Diagnostics and Troubleshooting, controls access to the device details.
• Setup, controls access to the pluggable module configuration and the function block
diagram.
*This setting limits access to via controller’s front panel user interface only, not via Composer.
The image below shows the security levels as configured by TestEquity. You must contact
TestEquity to get the passwords for your chamber.
After making all of the desired security settings, ensure that the security enabled radio button
(top left in the graphic above) is checked. Once security is applied to the controller, only the
administrator (Admin) can reconfigure or remove the security.
When the system file is saved, any applied security will be saved with it.

TestEquity F4T Specifications

General

Brand	TestEquity
Model	F4T
Category	Controller
Language	English