TestEquity F4T User Manual

Chapter 3 – Composer Software
Page 42 TestEquity F4T Controller
Deleting Steps
To delete a step:
• Right-click the step and choose Delete Step in the pop-up menu.
Or
• Click the step and then click the Delete button at the bottom of the step list.
Or
• Click the step and press the Delete key on the computer keyboard.
Password Protect a Profile
To avoid inadvertent changes to a profile, apply password protection to it.
To set a password for a profile:
1. Click the Password button.
2. In the dialog box enter a password (10 characters maximum).
3. Re-enter the same password to verify it.
4. Click OK.
Note: A password protected profile requires the password be entered to edit but not to copy it or
to delete it. If the profile is duplicated, the duplicate is not password protected.
Changing or Removing a Password from a Protected Profile
To change or remove a profile’s password, the password must be known.
To change a profile’s password:
1. Select the profile by clicking it in the profile list.
2. Enter the password and click OK.
3. Click the Password button.
4. Enter a new password (10 characters maximum).
5. Re-enter the same password to verify it.
6. Click OK.
To remove a profile’s password:
1. Select the profile by clicking it in the profile list.
2. Enter the password and click OK.
3. Click the Password button.
4. Click the Remove button.

TestEquity F4T Specifications

General

Brand	TestEquity
Model	F4T
Category	Controller
Language	English