Chapter 3 ā Composer Software
TestEquity F4T Controller Page 35
Data Logging
See Data Logging in Chapter 2 for an explanation of these settings. TestEquity suggest you
select the minimum number of relevant parameters to log. This will result in a smaller file size.
In the example below for a temperature chamber, only Temperature Set Point and Temperature
Process Value (the actual chamber temperature) were selected.
Trend Charts
See Trend Charts in Chapter 2 for an explanation of these settings. TestEquity suggest you
select the minimum number of relevant parameters to plot. In the example below for a
temperature chamber, only Temperature Set Point and Temperature Process Value (the actual
chamber temperature) were selected. The chart shown below is only a representation of how the
display on the F4T will appear with your choice of settings. Composer software cannot be used
to actually plot this data.
To Next Page
Loading...