Need help?Do you have a question about the TEXA ACKF01 and is the answer not in the manual?
General| Brand | TEXA |
|---|---|
| Model | ACKF01 |
| Category | Cleaning Equipment |
| Language | English |
Specifies the intended applications and limitations for the ACKF01 flushing kit.
Details the components included in the ACKF01 flushing kit.
Lists technical specifications such as refrigerant type, pressure, and capacity.
Step-by-step instructions for mounting the flushing canister onto Konfort service stations.
Procedure for activating the flushing program on the A/C service station display.
Guide to setting the flushing timing parameter based on system capacity.
Instructions for deactivating the flushing program on the A/C service station.
Essential safety guidelines for operating the flushing kit and handling refrigerants.
Guidelines for safe handling, storage, and conditions of refrigerants.
Details about the overpressure valve and warnings against tampering.
Specifies requirements for ventilation, altitude, temperature, and humidity.
Defines flushing as a method to remove contamination and lubricant from A/C systems.
Explains why flushing is crucial for A/C system operation, component life, and warranty.
Lists reasons justifying flushing, such as contamination, leakage, or component replacement.
Describes common types of A/C system contamination like dark oil, metal particles, and rubber particles.
Identifies A/C components sensitive to contamination and the need for replacement.
Steps to take before starting the flushing process, including vehicle positioning and safety.
Steps for connecting hoses and adapters to prepare the Konfort unit for flushing.
Guide on installing adapters and bridges based on system configuration (block or TXV).
Illustrates various connection examples using different adapters for flushing A/C systems.
Details the process of flushing A/C systems that use an expansion valve.
Details the process of flushing A/C systems that use an orifice tube.
Using the sight glass to monitor flushing progress and contamination levels.
Recommended steps after completing the flushing procedure, including O-ring replacement and leak checks.
Reference to the original manual for functions not related to flushing.
Steps for positioning, connecting, and preparing the A/C service station for flushing.
Procedure for turning on the unit and initiating the standby mode.
Instructions on how to properly stop the unit and the flushing program.
How to use the main switch for emergency stops of the unit.
Instructions for pressurizing specific Konfort models for optimized flushing performance.
Details the phases of a flushing cycle for specific Konfort models.
Details the phases of a flushing cycle for the ECK670E Konfort model.
Explains various malfunction, error, and warning messages displayed by the unit.
Description of the single flushing cycle for small contamination or UV additive removal.
Description of the multiple flushing cycle for heavy contamination or compressor damage.
Details periodic maintenance intervals and tasks for Konfort units.
Checks for wear and tear on components like service hoses and connectors.
Periodic verification of safety components, recommended every 24 months.
Instructions for verifying refrigerant electronic scale and pressure transducer calibration.
To Next Page