• Development kits and software (also see Tools
and Software)
– LP-MSPM0G3507 LaunchPad
™
development
kit
– MSP Software Development Kit (SDK)
2 Applications
• Motor control
• Home appliances
• Uninterruptible power supplies and inverters
• Electronic point of sale systems
• Medical and healthcare
• Test and measurement
• Factory automation and control
• Industrial transport
• Grid infrastructure
• Smart metering
• Communication modules
• Lighting
3 Description
MSPM0G350x microcontrollers (MCUs) are part of the MSP highly integrated, ultra-low-power 32-bit MCU
family based on the enhanced Arm
®
Cortex
®
-M0+ 32-bit core platform operating at up to 80-MHz frequency.
These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature
ranges from -40°C to 125°C, and operate with supply voltages ranging from 1.62 V to 3.6 V.
The MSPM0G350x devices provide up to 128KB embedded flash program memory with built-in error correction
code (ECC) and up to 32KB SRAM with ECC and hardware parity option. These MCUs also incorporate a
memory protection unit, 7-channel DMA, math accelerator, and a variety of high-performance analog peripherals
such as two 12-bit 4-Msps ADCs, configurable internal shared voltage reference, one 12-bit 1-Msps DAC, three
high speed comparators with built-in reference DACs, two zero-drift zero-crossover op-amps with programmable
gain, and one general-purpose amplifier. These devices also offer intelligent digital peripherals such as two
16-bit advanced control timers, five general-purpose timers (with one 16-bit general-purpose timer for QEI
interface, two 16-bit general-purpose timers for STANDBY mode, and one 32-bit general-purpose timer), two
windowed-watchdog timers, and one RTC with alarm and calendar modes. These devices provide data integrity
and encryption peripherals (AES, CRC, TRNG) and enhanced communication interfaces (four UART, two I2C,
two SPI, CAN 2.0/FD).
The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital
integration allowing for customers find the MCU that meets their project's needs. The MSPM0 MCU platform
combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system
designers to increase performance while reducing energy consumption.
MSPM0G350x MCUs are supported by an extensive hardware and software ecosystem with reference designs
and code examples to get the design started quickly. Development kits include a LaunchPad available for
purchase. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of
Code Composer Studio
™
IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are
also supported by extensive online collateral, training with MSP Academy, and online support through the TI
E2E
™
support forums.
For complete module descriptions, see the MSPM0 G-Series 80-MHz Microcontrollers Technical Reference
Manual.
CAUTION
System-level ESD protection must be applied in compliance with the device-level ESD specification
to prevent electrical overstress or disturbing of data or code memory. See MSP430™ System-Level
ESD Considerations for more information. The principles in this application note are applicable to
MSPM0 MCUs.
MSPM0G3507, MSPM0G3506, MSPM0G3505
SLASEX6A – FEBRUARY 2023 – REVISED JUNE 2023
www.ti.com
2 Submit Document Feedback
Copyright © 2023 Texas Instruments Incorporated
Product Folder Links: MSPM0G3507 MSPM0G3506 MSPM0G3505
To Next Page
Loading...
Need help?
General
