Texas Instruments TI-84 PLUS - Graphing Calculator User Manual

Chapter 9: Split Screen 142
DRAW Menu Text( Instruction
For the
Text( instruction:
•In
Horiz mode, row must be {25; column must be {94.
•In
G-T mode, row must be {45; column must be {46.
Text(row,column,"text")
PRGM I/O Menu Output( Instruction
For the
Output( instruction:
•In
Horiz mode, row must be {4; column must be {16.
•In
G-T mode, row must be {8; column must be {16.
Output(row,column,"text")
Note: The Output( instruction can only be used within a program.
Setting a Split-Screen Mode from the Home Screen or a Program
To set
Horiz or G-T from a program, follow these steps.
1. Press z while the cursor is on a blank line in the program editor.
2. Select Horiz or G-T.
The instruction is pasted to the cursor location. The mode is set when the instruction is
encountered during program execution. It remains in effect after execution.
Note: You also can paste Horiz or G-T to the home screen or program editor from the CATALOG
(Chapter 15).

Texas Instruments TI-84 PLUS - Graphing Calculator Specifications

General

Type	Graphing Calculator
Display Type	LCD
Screen Resolution	96 x 64 pixels
Processor	Zilog Z80
Memory	24 KB RAM, 480 KB Flash ROM
Power Source	4 AAA batteries (with backup lithium battery)
Connectivity	I/O port
Weight	7.4 oz (210 g)
Software	TI-OS (Texas Instruments Operating System)