Chapter 12: Statistics 191
• Edit-elements context
• Enter-name context
The stat list editor is first displayed in view-elements context. To switch through the four contexts,
select
1:Edit from the STAT EDIT menu and follow these steps.
1. Press } to move the cursor onto a list name and
switch to view-names context. Press ~ and | to
view list names stored in other stat list editor
columns.
2. Press Í to switch to edit-elements context.
You may edit any element in a list. All elements of
the current list are displayed in braces (
{ } ) in the
entry line. Press ~ and | to view more list
elements.
3. Press Í again to switch to view-elements
context. Press ~, |, †, and } to view other list
elements. The current element’s full value is
displayed in the entry line.
4. Press Í again to switch back to edit-elements
context. You may edit the current element in the
entry line.
5. Press } until the cursor is on a list name, then
press y 6 to switch to enter-name context.
6. Press ‘ to switch to view-names context.
7. Press † to switch back to view-elements context.
To Next Page
Loading...
