Texecom Premier 412 - Programming Check List

Premier 412/816/832 Installation Manual Programming the Control Panel
INS159-13 57
Programming Check List
The table below provides a checklist of what options require programming for each of the protocols supported:
Protocol
0 - Telephone No
1 - Account No
2 - Protocol Type
3 - Dial Attempts
4 - Partition Options
5 - Reporting Options
6 - Pulse Format Options
7 - Fast Format Channels
8 - Protocol Options
73 - Fast Format Restore Channels
74 - Fast Format Open/Close Channels
Notes
Pulse Format



1



 2
 3
1. Program to type 1.
2. Use table on page 54.
3. Set option 6 as required.
Express Format



1



 2
 3
1. Program to type 2.
2. Enable option 4 if 2 digit format is
required.
3. Set option 6 as required.
Fast Format



1


2

3

4
1. Program to type 3.
2. Select channels that are required
to report. Also program the channels
for the relevant type, see page 47.
3. Select channels that require a
restore to be reported.
4. Select channels that require to
report Open/Close.
Speech Module


1


2

3
1. Program to type 3.
2. Select channels 1 and/or 2,3 & 4.
Also program the channels for the
relevant type, see page 47.
3. Enable option 1.
Contact ID



1




2
1. Program to type 4.
2. Set options 2 and 6 as required.
SIA Level 2



1




2
1. Program to type 5.
2. Set options 1, 2 and 6 as required.
SIA Level 3



1




2
1. Program to type 5.
2. Set options 1, 2 and 6 as required.
Enable option 4.
Pager



1




2
1. Program to type 6.
2. Set options 3, 4, 5 and 6 as
required.
Mobile Phone



1




2
1. Program to type 7.
2. Set option 6 as required.