DSM Installation and Configuration Guide
Copyright 2009 - 2020 Thales Group. All rights reserved.
4
Bonding driver modes 55
Enable DHCP on bond0 interface 56
Configure NTP, time zone, date, time 56
Configure the hostname 57
Generate DSM Certificate Authority and create ACS 57
Configuring IPMI 60
Verify Web Access 61
Upload a license file 62
Add more CLI administrators (optional) 62
Full Disk Encryption 62
nShield Connect Integration 63
Deployment 63
High Availability 64
System and Software Requirements 64
Configuring nShield Connect HSM with DSM 64
Configure nShield Connect appliance and associated RFS 65
Add DSM as an nShield Connect client 65
Add the nShield Connect HSM to the DSM 65
Configuring High Availability for network HSM-enabled DSM 66
Managing network HSM-enabled DSM 66
Backing up and Restoring network HSM-enabled DSM 67
Updating a network HSM-enabled DSM Security World 68
High Availability (HA) Configuration for V6000 hardware appliance 68
Chapter 4: Installing and Configuring a DSM 69
Overview 69
Assumptions 70
Virtual machine hardware requirements 70
Configuring a Virtual Appliance 71
Configuring DSM using DHCP 71
Configuring DSM using Static IP Addressing 71
Virtual DSM Installation Checklist 72
Pre-Configuration tasks 73
Specify host name resolution method 74
Configure Ports 74
Access the Command Line Interface (CLI) 74
Virtual Appliance Setup 75
Disk Re-encryption for DSM Fastboot Image 76
Disk Re-encryption after initial setup 77
Virtual Appliance Configuration 77
To Next Page
Loading...
