57
Art. No.: A002-629_Rev 06
Last update: CW19/2018
THERA-Trainer tigo / THERA-Trainer veho - User manual
Setting options:
Fine
– Users with very sensitive joints and tendons.
– Motor will stop even at slight resistance.
Medium
– Users with less sensitive joints.
Rough
– Users with severe spasms. Motor will stop only at strong resistance.
Spasm
programme
Enables setting the direction of rotation in which the exercise will resume after
a spasm has been recognised.
Setting options:
Forward
– Always start in forward direction after a spasm was recognised
(recommended if user tends to have stretch spasms).
Backward
– Always start in backward direction after a spasm was recognised
(recommended if user tends to have flexion spasms).
Alternating
– Change direction of rotation after a spasm was recognised.
Follow
– Start in direction used previous to spasm being recognised.
Automatic speed
adjustment
When the automatic speed adjustment is set to ON, the passive lead speed
(motor) will automatically adapt itself during active exercise to a higher performance
made by the user.
Upper limit: 35 rpm
ExampleIf the user is working at 30 rpm instead of the set number of revolutions (lead speed)
of 15 rpm, the THERA-Trainer will gradually adjust the lead speed to 25 rpm after
approx. 10 seconds. If the user becomes passive again, THERA-Trainer continues
at 25 rpm. The user acquires his individual speed and if he becomes passive,
the exercise will continue at the number of revolutions comfortable to him.
Heart rate limitTHERA-Trainer reduces exercising resistance as soon as the set pulse rate is
reached. This makes sure that during training sessions, the user's pulse rate
always stays below the limit set by the doctor.
The heart rate limit allows individual settings for every training programme.
Use heart rate limit exclusively in combination with control and display unit
and cardio-pulse-set.
Set a larger crank radius for training programmes that require a higher active
performance (Ortho, Cardio).
Muscle supportThis function supports users with very low or one-sided residual power.
This function supports the available residual power in such a way that smooth
rotation is guaranteed at all times.
Active muscle support
boosts the user's activity
Takes over the work of the inactive side and acts as an electronic flywheel
for users with amputated legs.
WARNING!
Risk of injury due to inappropriate heart rate limit!
Before every training session and every time when changing the training programme,
check setting for heart rate limit using a cardio-pulse-set.
To Next Page
