© 2016 THINKWARE. All rights reserved.
Confidential Restricted
Overview of the sequence for mounting a rear camera _ Car
01. Ensure the rear camera operates properly by connecting it to the terminal.
02. Select a good location of rear camera attachment and attach the rear camera.
03. Make temporary wirings of the rear camera cables to the terminal.
04. Arrange the wires. (A pillar)
05. After removing the weather strip on the front passenger seat and insert the cable.
(Insert the cable while recovering the weather strip.)
06. Arrange the wires. (B pillar)
07. After removing the weather strip on the rear right passenger seat , insert the cable.
(Insert the cable while recovering the weather strip.)
08. Arrange the wires. (C pillar)
09. Connect the rear camera to the cable.
10. Arrange the wires. (Rear glass)
11. Perform operation test for rear camera (Test items: rear video recording check)
23
To Next Page
Loading...
