Thinkware H100 - Mounting Related Terms

© 2016 THINKWARE. All rights reserved.
Confidential Restricted
Names Descriptions
B+
- Continuous power : The point where the current flows even when the engine is off.
→ Continuous power is used by the following: stop lamps, emergency lamps, indoor lamps, motor seats and trunks.
ACC
- Accessory power : The point where the current flows when the car key is in ACC or On.
(But when starting the motor, the ACC power will be off.)
→ Cigar jacks, ACC, audio and power outlets use ACC.
GND
- Ground : the (-) side of electrical connection.
→ The metallic part connected to the fuse box frame is the ground.
Wirings
Device
- Equipment used to test B+, ACC and GND.
→ When the part that a wiring tester is connected to is powered up, you will normally see the light or hear the buzzer
sound.
Remover
- Often called a duck's foot. It is used to tear off indoor materials or remove the fuse cover.
Hera
- It is used to tear off indoor materials, remove the fuse cover or neatly arrange the wires.
Mounting related terms
1