THOMSON MEC 310#GENSET CONTROLLER - Page 117

MEC 310 GENSET CONTROLLER
PM075 REV 2 09/08/20 Page 113 THOMSON TECHNOLOGY
10000 Cmd.1 timer/start/stop
No. Setting Min. setting Max. setting Factory setting
10001
Cmd.1 timer/start/stop
Setpoint
timer M-logic Stop timer M-logic
10002
Cmd.1 timer/start/stop
Enable OFF ON OFF
10010 Cmd.1 day(s)
No. Setting Setting Factory setting
10010 Cmd.1 day(s) MO
TU
WE
TH
FR
SA
SU
MO-TU-WE-TH
MO-TU-WE-TH-FR
SA-SU
MO-TU-WE-TH-FR-SA-SU X
10020 Cmd.1 hour
No. Setting Min. setting Max. setting Factory setting
10020 Cmd.1 hour 0 23 10
10030 Cmd.1 min
No. Setting Min. setting Max. setting Factory setting
10030 Cmd.1 min 0 59 0
10320-10370 GSM pin code and dial-up numbers
No. Setting Min. setting Max. setting Factory setting
10320 GSM GSM pin code 0 9999 0
10331 GSM SMS telephone no. 0 +9999999999999 +4511223344
10332 GSM Enable OFF ON OFF
10341 GSM SMS telephone no. 0 +9999999999999 +4511223344
10342 GSM Enable OFF ON OFF
10351 GSM SMS telephone no. 0 +9999999999999 +4511223344
10352 GSM Enable OFF ON OFF
10361 GSM SMS telephone no. 0 +9999999999999 +4511223344
10362 GSM Enable OFF ON OFF
10371 GSM SMS telephone no. 0 +9999999999999 +4511223344
10372 GSM Enable OFF ON OFF
A telephone number set to 0 means not used. The prefix + and
country code
must always be entered. E.g. +1 for Canada.
Same structure is repeated for day 2-8, settings 10040-10310.