© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
155
4.3.12 is_Convert
Syntax
IDSEXP is_Convert(HIDS hCam, UINT nCommand, void* pParam, UINT cbSizeOfParam)
Description
is_Convert() is a general function for conversions. In version 4.80 a raw Bayer image is converted
to the desired format. You can set all parameters, which are important for software conversion:
Pixel format
Pixel converter (3×3, 5×5)
Color correction
Gamma
Saturation
Edge enhancement
The target buffer must be allocated with the is_AllocImageMem() function and must have the right
size.
The nCommand input parameter is used to select the function mode. The pParam input parameter
depends on the selected function mode. If you select functions for setting or returning a value,
pParam contains a pointer to a variable of the UINT type. The size of the memory area to which
pParam refers is specified in the cbSizeOfParam input parameter.
Note
The following functions are obsolete by the is_Convert() function:
is_ConvertImage()
is_SetConvertParam()
See also Obsolete functions
Input parameters
IS_CONVERT_CMD_APPLY_PARAMS_AND_CONVERT_B
UFFER
Converts a raw Bayer buffer with the passed
conversion parameters
Pointer to a function parameter, whose function
depends on nCommand.
Size (in bytes) of the memory area to which
pParam refers.
To Next Page
Loading...
Need help?
General
