THORLABS DCC1645C Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
315
4.3.72 is_ReadEEPROM
USB 2.0
USB 3.0
USB 2.0
USB 3.0
Syntax
INT is_ReadEEPROM (HIDS hCam, INT Adr, char* pcString, INT Count)
Description
Using is_ReadEEPROM(), you can read the contents of the camera EEPROM. Besides the hard-
coded factory information, the EEPROM of the DCx Camera can hold 64 bytes of user data.
Input parameters
hCam
Camera handle
Adr
Starting address for data reads Value range:
0...63
pcString
Pointer to the buffer for the data to read (min.
size = Count)
Count
Number of characters to read
Return values
IS_BAD_STRUCTURE_SIZE
An internal structure has an incorrect size.
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because
no driver has been loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera
failed (no camera connected or initialization
error).
IS_CRC_ERROR
A CRC error-correction problem occurred while
reading the settings.
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed.
Possibly the versions of the uc480.dll (API) and
the driver file (uc480_usb.sys) do not match.
IS_NO_SUCCESS
General error message
IS_NOT_CALIBRATED
The camera does not contain any calibration
data.
IS_NOT_SUPPORTED
The camera model used here does not support
this function or setting.
IS_SUCCESS
Function executed successfully
Related functions
is_WriteEEPROM()

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English