THORLABS DCC1645C Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging236
DCx Camera Functional Description and SDK Manual
4.3.43 is_GetFrameTimeRange
USB 2.0
USB 2.0
Syntax
INT is_GetFrameTimeRange (HIDS hCam,
double* min, double* max, double* intervall)
Description
Using is_GetFrameTimeRange(), you can read out the frame rate settings which are available for
the current pixel clock setting. The returned values indicate the minimum and maximum frame
duration in seconds. You can set the frame duration between min and max in increments defined by
the intervall parameter.
The following applies:
intervall)*n(min
1
min
1
max
max
1
min
nfps
fps
fps
The call of this function makes only sense in the freerun mode.
Note
The use of the following functions will affect the frame duration:
is_PixelClock()
is_SetOptimalCameraTiming()
is_AOI() (if the image size is changed)
is_SetSubSampling()
is_SetBinning()
Changes made to the window size, the frame rate or the read-out timing (pixel clock frequency)
also affect the defined frame duration. For this reason, you need to call is_GetFrameTimeRange()
again after such changes.
Input parameters
hCam
Camera handle
min
Returns the minimum available frame duration.
max
Returns the maximum available frame duration.
intervall
Returns the increment you can use to change the
frame duration.
Return values
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_PARAMETER
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not available
in this mode.
IS_NO_SUCCESS
General error message
IS_SUCCESS
Function executed successfully
Related functions

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English