THORLABS DCC1645C Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
319
4.3.74 is_ResetToDefault
USB 2.0
USB 3.0
USB 2.0
USB 3.0
Syntax
INT is_ResetToDefault (HIDS hCam)
Description
is_ResetToDefault() resets all parameters to the camera-specific defaults as specified by the
driver. By default, the camera uses full resolution, a medium speed and color level gain values
adapted to daylight exposure.
Input parameters
hCam
Camera handle
Return values
IS_CANT_ADD_TO_SEQUENCE
The image memory is already included in the
sequence and cannot be added again.
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because
no driver has been loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera
failed (no camera connected or initialization
error).
IS_DR_CANNOT_CREATE_SURFACE
The image surface or overlay surface could not
be created.
IS_DR_CANNOT_CREATE_TEXTURE
The texture could not be created.
IS_DR_CANNOT_CREATE_VERTEX_BUFFER
The vertex buffer could not be created.
IS_DR_DEVICE_OUT_OF_MEMORY
Not enough graphics memory available.
IS_DR_LIBRARY_NOT_FOUND
The DirectRenderer library could not be found.
IS_INVALID_CAMERA_TYPE
The camera type defined in the .ini file does not
match the current camera model.
IS_INVALID_CAPTURE_MODE
The function can not be executed in the current
camera operating mode (free run, trigger or
standby).
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_MEMORY_POINTER
Invalid pointer or invalid memory ID
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed.
Possibly the versions of the uc480.dll (API) and
the driver file (uc480_usb.sys) do not match.
IS_NO_SUCCESS
General error message
IS_NOT_CALIBRATED
The camera does not contain any calibration
data.

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English