THORLABS DCC1645C Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
191
4.3.20 is_EnableAutoExit
USB 2.0
USB 3.0
USB 2.0
USB 3.0
Syntax
INT is_EnableAutoExit (HIDS hCam, INT nMode)
Description
is_EnableAutoExit() enables automatic closing of the camera handle after a camera has been
removed on-the-fly. Upon closing of the handle, the entire memory allocated by the driver will be
released.
Input parameters
hCam
Camera handle
nMode
IS_ENABLE_AUTO_EXIT
Enables automatic closing
IS_DISABLE_AUTO_EXIT
Disables automatic closing
IS_GET_AUTO_EXIT_ENABLED
Returns the current setting
Return values
Current setting when used together
withIS_GET_AUTO_EXIT_ENABLED
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_NO_SUCCESS
General error message
IS_SUCCESS
Function executed successfully
Related functions
is_ExitCamera()

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English