© 2016 Thorlabs Scientific Imaging
3 Operation
73
3.4.1 uc480 Camera Manager
The DCx Camera Manager is the central tool for managing all DCx cameras. It displays information
on the connected USB DCx Cameras and provides options for configuring them.
On Windows systems the DCx Camera Manager can be accessed as follows:
Start > Programs > Thorlabs > Scientific Imaging > DCx Camera Manager
Click in the figure to get help on the functions.
Camera list
The camera list displays information on the connected DCx Cameras.
Attention
Under Windows XP (64 bit) and Windows Vista DC3240x Cameras are displayed in the DCx
Camera Manager, but they cannot be opened, because they are supported by Windows 7 and
Windows XP (32 bit) only
Control center
In the control center, you can access the configuration and display detailed information on the
connected DCx Cameras.
In the drop down box, you can choose the language for the DCx Camera
Manager. This setting is saved and remains effective even after you close and reopen the
program.
For proper display of Asian languages on Windows systems, the support package for East Asian
languages has to be installed on your system (in "Control Panel > Regional and Language
Options").
To Next Page
Loading...
Need help?
General
