THORLABS DCC1645C Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging162
DCx Camera Functional Description and SDK Manual
Description
Using is_DeviceFeature() you can configure special camera functions provided by specific uc480
models:
The AOI merge mode is currently supported by the following camera models:
DCC3240
DCC3260
Flashing per line
Note that depending on the set line rate, the optocoupler of the flash output may be too slow if the
flash output is set to flash high active or flash low active. In this case, use a GPIO as flash output
because the GPIO have no optocoupler.
The nCommand input parameter is used to select the function mode. The pParam input parameter
depends on the selected function mode. If you select functions for setting or returning a value,
pParam contains a pointer to a variable of the UINT type. The size of the memory area to which
pParam refers is specified in the cbSizeOfParam input parameter.
Input parameters
hCam
Camera handle
nCommand

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English