THORLABS DCC1645C Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
289
hCam
Camera handle
IO_GPIO_1: Sets GPIO 1 as output.
IO_GPIO_2: Sets GPIO 2 as output.
IS_IO_CMD_PWM_GET_PARAMS
Returns the current values of the PWM
parameters (Example 8)
IS_IO_CMD_PWM_SET_PARAMS
Sets the current values of the PWM parameters
(Example 8)
IS_IO_CMD_PWM_GET_PARAMS_MIN
Returns the minimum possible values for PWM
parameters (Example 8)
IS_IO_CMD_PWM_GET_PARAMS_MAX
Returns the maximum possible values for PWM
parameters (Example 8)
IS_IO_CMD_PWM_GET_PARAMS_INC
Returns the increments of the PWM parameters
(Example 8)
LED
IS_IO_CMD_LED_GET_STATE
Returns the state of the LED (Example 3)
IS_IO_CMD_LED_SET_STATE
Sets the state of the LED (Example 3)
IO_LED_STATE_1: Sets LED to orange.
IO_LED_STATE_2: Sets LED to green.
IS_IO_CMD_LED_TOGGLE_STATE
Toggles between the LED states (Example 3)
pParam
Pointer to a function parameter, whose function
depends on nCommand.
cbSizeOfParam
Size (in bytes) of the memory area to which
pParam refers.

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English