THORLABS DCC1645C Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging304
DCx Camera Functional Description and SDK Manual
pParam
Pointer to a function parameter, whose
function depends on nCommand.
cbSizeOfParam
Size (in bytes) of the memory area to
which pParam refers.
Contents of the IS_LUT_CONFIGURATION_PRESET_64 structure
IS_LUT_PRESET
predefinedLutID
ID of the predefined LUT
IS_LUT_CONFIGURATION_64
lutConfiguration
Predefined LUT
Contents of the IS_LUT_CONFIGURATION_64 structure
DOUBLE
dblValues[3][IS_LUT_64]
Defines a LUT with 64 knee
points. This results in 32
sections with a start and end
point each.
BOOL
bAllChannelsAreEqual
If TRUE, the same LUT is applied
to all three channels.
Contents of the IS_LUT_STATE structure
BOOL
bLUTEnabled
LUT is enabled
INT
nLUTStateID
ID of the LUT status information
INT
nLUTModeID
ID of the LUT mode
INT
nLUTBits
Used bits of the LUT
Contents of the IS_LUT_SUPPORT_INFO structure
BOOL
bSupportLUTHardware
Hardware LUT is supported
BOOL
bSupportLUTSoftware
Software LUT is supported
INT
nBitsHardware
Used bits of the hardware LUT
INT
nBitsSoftware
Used bits of the software LUT
INT
nChannelsHardware
Supported channels for
hardware LUT
INT
nChannelsSoftware
Supported channels for
software LUT
Return values
IS_FILE_READ_OPEN_ERROR
The file cannot be opened.
IS_FILE_WRITE_OPEN_ERROR
File cannot be opened for writing or reading.
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
IS_NO_SUCCESS
General error message
IS_NOT_SUPPORTED
The camera model used here does not support
this function or setting.
IS_SUCCESS
Function executed successfully

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English