THORLABS DCC1645C Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
311
Example 3
INT nRet = is_ParameterSet(m_hCam, IS_PARAMETERSET_CMD_SAVE_EEPROM, NULL, NULL);
Example 4
// Save parameters to file (open filebox)
INT nRet = is_ParameterSet(m_hCam, IS_PARAMETERSET_CMD_SAVE_FILE, NULL, NULL);
// Save parameters to specified file
nRet = is_ParameterSet(m_hCam, IS_PARAMETERSET_CMD_SAVE_FILE, L"file.ini", NULL);
Example 5
// Get the number of supported parameter sets in the camera EEPROM
UINT nNumber;
INT nRet = is_ParameterSet(m_hCam, IS_PARAMETERSET_CMD_GET_NUMBER_SUPPORTED, (void*)
&nNumber, sizeof(nNumber));

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English