© 2016 Thorlabs Scientific Imaging330
DCx Camera Functional Description and SDK Manual
pval1: defines the number (default: 4)
IS_GET_AUTO_WB_SKIPFRAMES
Returns the number of frames to be skipped
during automatic control.
Control parameters
pval1: returns the current setting
IS_GET_AUTO_WB_SKIPFRAMES_RANGE
Returns the permissible range for the number of
frames to be skipped.
Control parameters
pval1: returns the minimum permitted value
pval2: returns the maximum permitted value
Default values for auto gain control/auto exposure shutter
NULL is passed for the pval1, pval2 parameters.
IS_DEFAULT_AUTO_BRIGHT_REFERENCE
Default setpoint for auto gain control and auto
exposure shutter.
IS_MIN_AUTO_BRIGHT_REFERENCE
Minimum setpoint for auto gain control and auto
exposure shutter.
IS_MAX_AUTO_BRIGHT_REFERENCE
Maximum setpoint for auto gain control and auto
exposure shutter.
Default value for auto speed.
Maximum value for auto speed
Default values for Auto White Balance
NULL is passed for the pval1, pval2 parameters.
Minimum value for auto white balance offset.
Maximum value for auto white balance offset.
Default value for auto white balance speed.
Minimum value for auto white balance speed.
Maximum value for auto white balance speed.
Control parameter, can have a variable value
depending on the corresponding auto function
Control parameter, can have a variable value
depending on the corresponding auto function
*1 Not all sensors support this feature (see information box)
*2 Not with use of sensor's internal control functionality
Return values
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because
no driver has been loaded.
An attempt to initialize or select the camera
failed (no camera connected or initialization
error).
Because of other incompatible settings the
function is not possible.
To Next Page
Loading...
Need help?
General
