© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
343
Camera is in standby mode, function not allowed
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
An IO request from the uc480 driver failed.
Possibly the versions of the uc480.dll (API) and
the driver file (uc480_usb.sys) do not match.
The camera does not contain any calibration
data.
The camera model used here does not support
this function or setting.
No memory could be allocated.
Function executed successfully
A timeout occurred. An image capturing process
could not be terminated within the allowable
period.
Related functions
is_SetDisplayMode()
is_SetColorConverter()
is_SetColorCorrection()
is_GetColorDepth()
is_AllocImageMem()
is_RenderBitmap()
Note on obsolete parameters
The following parameters for color formats are obsolete. Only the new parameters should be used: