THORLABS DCC1645C Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging376
DCx Camera Functional Description and SDK Manual
IS_INVALID_BUFFER_SIZE
The image memory has an
inappropriate size to store the image in
the desired format.
IS_INVALID_CAMERA_TYPE
The camera type defined in the .ini file
does not match the current camera
model.
IS_INVALID_CAPTURE_MODE
The function can not be executed in the
current camera operating mode (free
run, trigger or standby).
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_MEMORY_POINTER
Invalid pointer or invalid memory ID
IS_INVALID_MODE
Camera is in standby mode, function not
allowed
IS_INVALID_PARAMETER
One of the submitted parameters is
outside the valid range or is not
supported for this sensor or is not
available in this mode.
IS_INVALID_PIXEL_CLOCK
This setting is not available for the
currently set pixel clock frequency.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver
failed. Possibly the versions of the
uc480.dll (API) and the driver file
(uc480_usb.sys) do not match.
IS_NO_ACTIVE_IMG_MEM
No active image memory available. You
must set the memory to active using the
is_SetImageMem() function or create a
sequence using the
is_AddToSequence() function.
IS_NO_SUCCESS
General error message
IS_NOT_CALIBRATED
The camera does not contain any
calibration data.
IS_NOT_SUPPORTED
The camera model used here does not
support this function or setting.
IS_NULL_POINTER
Invalid array
IS_OUT_OF_MEMORY
No memory could be allocated.
IS_SEQUENCE_BUF_ALREADY_LOCKED
The memory could not be locked. The
pointer to the buffer is invalid.
IS_SUCCESS
Function executed successfully
IS_TIMED_OUT
A timeout occurred. An image capturing
process could not be terminated within
the allowable period.
IS_TRIGGER_ACTIVATED
The function cannot be used because
the camera is waiting for a trigger
signal.
Related functions
is_SetBinning()

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English