© TIMYO B.V. TIMYO USER MANUAL EN SKO52021V2 PAGE 10
■ Familiarize yourself with the e-bike on a safe terrain before taking your first real bike ride!
■ Wear brightly colored protective clothing.
■ You are required by law to wear a helmet when riding an e-bike.
3.6 Legal requirements
Be familiar with and follow the traffic rules of your country. Before taking your e-bike on public roads,
please make sure you are aware of the national regulations applicable in your specific country.
Consult your traffic licensing authority for information on how your e-bike should be equipped for
use on public roads.
The following (and additional) information is also applicable:
■ What lighting equipment must be installed or must you carry with you?
■ What kind of brakes should the e-bike be equipped with?
■ There may also be age restrictions on riding in certain areas.
■ This addresses, for example, the issue of children riding on public roads.
■ If it is mandatory to wear a helmet, it is indicated here.
3.7 Intended use
The electrical components of the drive system are designed for
use with e-bike engines and may not be used for any other purpose.
The drive system with an output of 250 Watts may therefore only be used in combination with e-bikes.
Designed and approved for EPAC electric bikes. It is designed for use with city and touring bikes. It can
also be used for mountain bikes. It should not be used for competitions or commercial purposes. The
Max Drive System is designed for use with city and trekking bikes. It can also be used for mountain
bikes. Its use is not allowed for competitions or commercial purposes.
!
To Next Page
Loading...