© TIMYO B.V. TIMYO USER MANUAL EN SKO52021V2 PAGE 28
Number Definition Solution
35
Detection circuit for 15V has an error. Contact your dealer.
36
Detection circuit on the control panel has an
error
Contact your dealer.
37
WDT circuit is defective. Contact your dealer.
41
The total voltage of the battery is
too high.
Contact your dealer.
42
The total voltage of the battery is
too low.
Contact your dealer.
43
The total power of the battery cells is too
high
Contact your dealer.
44
The voltage of the single cell is too
high.
Contact your dealer.
45
The temperature of the battery is too
high.
Contact your dealer.
46
The temperature of the battery is too
low.
Contact your dealer.
47
The SOC of the battery is too high. Contact your dealer.
48
The SOC of the battery is too low. Contact your dealer.