3-79
■
(4) AXIS Step (unit for angle)
Sets the display units for the corneal astigmatism axial angle.
1° / 5°
(5) Measurement Times
Set the number of data sets taken per measurement.
10 data x 1 time : Load 10 data sets once.
5 data x 2 times : Load 5 data sets twice.
3 data x 3 times : Load 3 data sets 3 times.
3 data x 1 time : Load 3 data sets once.
1 data x 5 times : Load 1 data set 5 times.
1 data x 10 times : Load 1 data set 10 times.
When “5 data x 2 times” is selected in auto measurement mode, 5 data sets
are loaded after alignment is completed and measurement starts. Then,
alignment is performed again, 5 data sets are loaded, and measurement is
completed.
(6) Time Limit
Set the time limit for loading the preset number of datasets.
Input range : 10 – 60 (s)
(7) Measurement Display Area
Average / Typical
[Ultrasound – Axial]
(Fig. 1)
(1) Default fitting formula
Set the fitting formula for normal operation.
Contact / Immersion
(2) Fix light
Select whether the fix light in the biometry probe is turned on or off.
ON / OFF
(3) Setting Velocity
Mean Velocity (M/V) / Sectional Velocity (S/V)
(1)
(2)
(3)
To Next Page
Loading...
