■
1-4
- Clean the instrument at the end of operation in preparation for the next
use.
- Clean and neatly arrange the accessories and cables.
■ If any failure occurs in the instrument, immediately stop operation, indicate the failure in
the instrument, and contact our local distributor for repairs.
- Do not modify the instrument. Doing so may cause electric shock or
failure of the instrument. There is a high-voltage section in the
instrument. Touching this section will result in death or serious injuries.
- Disconnect the power cord from the outlet when replacing fuses.
Otherwise, you may get an electric shock, resulting in death or serious
injuries.
- Use the power cord and fuses provided with the instrument or specified
by Tomey to ensure safety. Also, do not use the accessories provided
with the instrument for other equipment.
- When any failure occurs in the instrument, indicate the failure in the
instrument and contact our local distributor for inspection and repairs. Do
not attempt to repair the instrument yourself.
- Conduct regular inspections of the instrument and components.
- When the instrument is not used for 1 month or longer, check that the
instrument is operating correctly and safely before starting operation.
Refer to "5.3 Inspection" in this manual for the checking procedures.
To Next Page
Loading...
