■
6-2
The whole monitor screen is dark and not easy to see.
The brightness of the monitor is low.
Adjust the brightness of the screen using the brightness
setting of the screen described in "3.9.1 General."
The clock displayed is stopped.
Stored data is displayed.
While displaying stored data,the date and time of
measurement of the data is shown. When closing to
the screen, current time is displayed.
The data cannot be printed by the video printer.
Printer paper.
Check for the remaining of printer paper. Verify that
printer paper is correctly set as described in the
instruction manual of the video printer.
USB cable.
Verify that the USB cable is correctly connected to the
main unit and the video printer. For correct
connection, refer to "3.2.1 c) Connecting an external
video printer".
Setting the output printer
Set "Video Monochrome" to select a monocrhome
printer as the output destination when pressing the
PRINT button; set “Video Color” when the output
destination is a color printer. Refer to “3.9.4 b)
Selecting and setting printer” for setting details.
The brightness and color of printouts from the video printer are
remarkably different from that of the screen display.
Setting of the video printer is not appropriate.
Adjust the contrast, brightness, and color as described in
the instruction manual of the video printer.
To Next Page
Loading...
